Direct Contact

+44 161 776-1414

Special products

Screws and nuts
Product information

Customised products for different ap­plic­a­tions

Our wide range of screws and nuts offers a diversity of applications. Plastic screws fulfil the requirements of wet and clean room environments. The material is also oil and hat resistant. The clear benefits compared to metal are in the good resistance against moisture and diverse chemicals. They have insulating properties and a high tolerance with load changes due to their elasticity. They are used in medical appliances, e.g. for this reason.

Our customers have the possibility to order from a standard range of products from 15 different screw and nut versions including accessories such as protective caps and plain washers. Profit from customised products in the sector screws and nuts for the most diverse applications. They serve a ideal helper for your usage scenarios - irrelevant if you need diverse nuts of screws with slot, crossrecess or internal hexagon.

The products in detail

Slotted cheese head screws

The technical dimensions of the slotted cheese head screws are similar to DIN 84 / DIN EN ISO 1207. They are available ex-stock with metric ISO threads M2, M2.5, M3, M4, M5, M6, M8 und M10 in standard material PA 6.6 (in the colour nature).

Slotted pan head screws

The technical dimensions of the slotted pan head screws are similar to DIN 85 / DIN EN ISO 1580. They are available ex-stock with metric ISO threads M3, M4, M5, M6, M8 und M10 in standard material PA 6.6 (in the colour nature).

Hexagon-head screws (injection moulded)

The technical dimensions of the hexagon head screws are similar to DIN 933 / DIN EN ISO 4017 and / or DIN 931 / DIN EN ISO 4014. They are available ex-stock with metric ISO threads M3, M4, M5, M6, M8, M10, M12 and M16 in standard material PA 6.6 (in the colour nature).


Slotted coun­ter­sunk flat head screws

The technical dimensions of the slotted countersunk flat head screws are similar to DIN 963 / DIN EN ISO 2009. They are available ex-stock with metric ISO threads M3, M4, M5, M6, M8 und M10 in standard material PA 6.6 (in the colour nature).

Slotted raised coun­ter­sunk head screws

The technical dimensions of the slotted raised countersunk head screws are similar to DIN 964 / DIN EN ISO 2010. They are available ex-stock with metric ISO threads M3, M4, M5, M6, M8 and M10 in standard material PA 6.6 (in the colour nature).

Coun­ter­sink flat head screws with cross­re­cess H

The technical dimensions of the countersunk flat head screws with crossrecess H are similar to DIN 965 / DIN EN ISO 7046. They are available ex-stock with metric ISO threads M3, M4, M5, M6, M8 und M10 in standard material PA 6.6 (in the colour nature).


Hexagon socket head cap screws

The technical dimensions of the hexagon socket head cap screws are similar to DIN 912 / DIN EN ISO 4762. They are available ex-stock with metric ISO threads M6, M8, M10, M12 and M16 in standard material PA 6.6 (in the colour nature).

Slotted set screws

The technical dimensions of the slotted set screws are similar to DIN 551 / DIN EN ISO 4766 (without flat point). They are available ex-stock with metric ISO threads M4, M5, M6, M7, M8, M10 and M12 in standard material PA 6.6 (in the colour nature).

Wing screws with rounded wings

The technical dimensions of the wing screws (rounded wings) are similar to DIN 316. They are available ex-stock with metric ISO threads M5 and M6 in standard material PA 6.6 (in the colour nature).


Cup square bolts

The technical dimensions of the cup square bolts are similar to DIN 603. They are available ex-stock with metric ISO threads M6 and M8 in standard material PA 6.6 (in the colour nature).

Knurled screws

The technical dimensions of the knurled screws are similar to DIN 464. They are available ex-stock with metric ISO thread M4 in standard material PA 6.6 (in the colour nature).

Hexagon nuts

The technical dimensions of the hexagon nuts are similar to DIN 555 / DIN EN ISO 4034. They are available ex-stock with metric ISO threads M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M16, M20 and M24 in standard material PA 6.6 (in the colour nature).


Hexagon cap nuts (high type)

The technical dimensions of the hexagon nuts (high type) are similar to DIN 1587 (high type). They are available ex-stock with metric ISO threads M3, M4, M5, M6, M8, M10, M12 and M16 in standard material PA 6.6 (in the colour nature).

Knurled nuts (high)

The technical dimensions of the knurled nuts (high and flat) are similar to DIN 466 or DIN 467. They are available ex-stock with metric ISO threads M4, M5 and M6 in standard material PA 6.6 (in the colour nature).

Wing nuts with rounded wings

The technical dimensions of the wing nuts (rounded wings) are similar to DIN 315. They are available ex-stock with metric ISO threads M4, M5, M6, M8 und M10 in standard material PA 6.6 (in the colour nature).

The ac­cessor­ies in detail

Protecting caps for hexagon nuts and hexagon head screws

The technical dimensions of the protecting caps for hexagon nuts and hexagon head screws are available ex-stock with metric ISO threads M4, M5, M6, M8, M10 and M12 in standard material Polyethylene in the colour nature, grey and black.

Plain washers (normal series)

The technical dimensions of the plain washers (normal series) are similar to DIN 125 / DIN EN ISO 7089. They are available ex-stock in the nominal sizes* 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16 and 20 in standard material PA 6 (in the colour nature).

* Nominal sizes 3, 4, 5, 6, 8, 10 and 12 are available for the customised material PVC.

Plain washers (large series)

The technical dimensions of the plain washers (large series) are similar to DIN 9021 / DIN EN ISO 7093. They are available ex-stock in the nominal sizes** 3, 4, 5, 6, 8, 10, 12 and 16 in standard material PA 6 (in the colour nature).

** Nominal sizes 3, 4, 5, 6, 8, 10 and 12 are available for the customised material PVC.

Customised materials and colours

Customised materials of plastics PA (fibre-glass reinforced), PP (in the colour nature), PPH (in the colour grey) and PVDF are available for almost all screws and nuts. For the standard material PA 6.6 or PA 6, you can also select the colour black as customised colour.

As customised material, you have the plastics PA 6.6 sw for the knurled nuts (high and flat), PP (in the colour nature), soft PVC and PVDF for the plain washers (normal series) as well as soft PVC for the plain washers (large series).

Kontakt

We would be pleased to provide you with non-binding advice on your solution from WERIT

Contact
Please call back Write an e-mail

Product catalogue

Download catalogues, brochures and other printable material directly as PDF. Under Service Downloads, the PDF files are sorted for you according to the subject.