Food product (max. density: 1.4)
Intermediate Bulk Container
NUTRilineaseptic are radiation sterilized IBCs for the food industry (FDA,EN 10/2011, Halal, Kosher) delivered Ready-to-Fill.
These IBCs are optimized for sterile filling and emptying (also partial removal) and extend the minimum shelf life of sensitive products.
- Submirror filling possible via the valve
- TopFill with Elpo connection for low viscosity products (< 6000 mpas)
- AirAssist with air-assisted emptying for highly viscous products (> 8000 mpas)
- Airless, aseptic inliner with excellent flexcrack resistance
- Full volume development of the air-empty inliner during filling (filling speed up to 1000 l min)
The following dimensions are standardised IBCs for filling materials up to a density of 1.4 Rho
max. density: 1,9
AirAssist-Box: Air pressure regulator – controls the filling of the air cushion during sterile collection.
Elpo connection – for the common filling systems of the food industry
DN 50 valve steamable up to 125°C with dairy pipe thread.
Filling and emptying can be done via the valve.
DN 50 mm
Dairy pipe thread suitable
The plus in service
WERIT offers their customers a high level of service - these include the IBC reconditioning, return of containers free of charge and the collection of used and emptied IBCs.
When handling raw materials and resources in a responsible manner, WERIT works continuously on new innovative and intelligent solutions for packaging systems, their collection and environmentally-friendly recycling. The WERIT IBC module system plays off its strengths to the fullest here: it permits a trouble-free cleaning as well as an ecological reconditioning by the replacement of individual components. In this way, WERIT guarantees the resource-conserving and economical multi-way usage.
Via the WERIT RECOline, we take back all WERIT IBCs and return them to the resources cycle. You are looking for a competent partner for the return of emptied IBCs of other manufacturers? This is guaranteed to you via PACKONE©. A special inner container designed by WERIT permits, independent of the brand, the reuse of the IBC module so that a UN approved PACKONE-IBC is generated as good as new.
Use our All-in-One PackOne WERIT Ticket service today and get us to collect your used and emptied container free of charge (please note our collection conditions). Simply fill in the IBC return ticket - we will take care of the rest.
Frequently Asked Questions
HDPE is a robust and durable plastic which, in case of our IBC containers, is translucent and protects the content against UV radiation. Our IBC accessories also comprise this special material. HDPE is generated by the industrial polymerisation of ethane. At the beginning, this raw material was milky and waxy. However, today it has developed to an innovative thermoplastic plastic with ideal deformation properties and can be adjusted optimally to all specific requirements by the addition of additives. The HDPE that we use is dimensionally stable at temperatures from -40 to +70 °C and resistant against most alkalis, acids and chemicals.
An interesting fact at the end: HDPE has already been used commercially since 1957 for cable insulation, piping systems and packaging material.
The dimension for the filling opening is the same for all three product lines. The ECOline IBC (non UN), TOPline IBC (UN) as well as the POLYex IBC containers are equipped either with an NW 150 or NW 225 filling opening with screw lid and an optional venting. The ECOline IBC (non UN) is additionally available with an NW 400 filling opening with clamping ring lid.
All of our IBC containers are equipped with a NW 50 or NW 80 discharge valve which is integrated or replaceable.
Naturally. Our containers are suitable for almost all liquids - why shouldn't it also be used as a rain tank? The (food product) industry is already also using water tanks today.