Einwandiger Heizöltank Storage tank 1003-0 * Q3

We are convinced of the quality and safety of our tanks. That is why we not only comply with the statutory warranty obligations, but also offer our specialised wholesale customers and selected tank protection companies a 15-year warranty on all double-walled Techno tanks. We grant a two-year guarantee on technical accessories.

WERIT is a pioneer in the manufacture and development of plastic tanks with over 60 years of expertise in plastics processing. Qualified employees, state-of-the-art technologies and constant quality controls are today the guarantee of our market-driven, high-quality products.

We sell exclusively to plumbing and heating wholesalers as well as selected tank protection companies and plant engineers. We will be happy to name competent partners in your area if you need an oil tank for your oil heating system. They can provide you with information on storage, installation, cleaning, refurbishment and maintenance of the tank and heating system.

You will find all detailed information about our heating oil tanks in our product catalogue.

The following applies when determining the required accessories:
You need a basic kit to install the 1st tank. If you want to install another tank next to it, you will need an extension kit. Installation one behind the other requires a connection kit and an angle kit is required for an L-shaped installation.

The nominal volume indicates the maximum filling volume to be achieved, excluding safety criteria. The usable volume, on the other hand, is the actual filling volume of a heating oil tank system.

The useful volume is calculated on the basis of the nominal volume, taking into account the limit value sensor switch-off time, a maximum line length of 20 metres and a return reserve of at least 100 litres. Depending on the tank variant, this so-called differential amount can exceed the usual 95%.

There are a few things to bear in mind when installing tank batteries. This includes a regulation that explicitly governs wall clearances:

• Single-row batteries with one tank side must be at least 40 centimetres apart, all other tank sides must be at least five centimetres apart. There is currently no regulation(s) for the distance from the ceiling.
• For double-row batteries (multi-block system), a distance of at least 40 centimetres must be maintained on one front side and two long sides, and a distance of 5 cm on the remaining side. The ceiling clearance is 20 cm above the heating oil tanks.
• The distance can be reduced to the safety requirements of a single-row system using a ceiling clearance of 50 cm and a corresponding leak detector.

Yes! In our product brochure on page 8 you will find a visualised representation of the wall distances.

99% of leaks in the pipe system are not caused by the sealing element used. Plastic tanks have a settling behaviour whereby pipes are widened if they are installed too rigidly on site. As a result, the seal appears too small and can no longer seal completely.

In addition, you as the customer can be sure that a new pipe will work immediately, minimising the time you need to invest.

You can carry out a self-check with the help of our information sheet "Technical reasons for the removal of heating oil tanks" with the reasons contained therein.

As the manufacturer, we recommend an expert inspection in accordance with AwSV (Ordinance on Installations for Handling Substances Hazardous to Water).

You can find more information and experts in your area at www.sicherer-öltank.de

Yes, that's no problem at all. Our double-walled safety tanks in the flood version are approved up to a flood height of 3.5 metres. This is the maximum possible height that can be achieved with a plastic heating oil tank.

Further information can be found in our Techno HW flyer.