System components - perfectly matched for precise and efficient installation
System components - perfectly coordinated for precise and efficient installations
The WERIfix accessories complement the installation systems perfectly and ensure maximum flexibility when implementing customised sanitary solutions. Whether wall brackets, traverses or other system components - all elements are perfectly harmonised and enable safe, stable and efficient installation.
Thanks to the high quality of the materials and the sophisticated design, a wide variety of installation situations can be reliably realised. The accessories support precise alignment, simplify installation and contribute to the long-term stability of the entire pre-wall installation.
In combination with the WERIfix installation frames, the result is a comprehensive system that fulfils the highest requirements for functionality, safety and durability in both new builds and renovations.
Accessories for WERIfix
For installation depth 135-150 mm
Art. no. 116-000000001
- Suitable for wall projections or corner mounting
- Easy mounting in standard C-rails with dimensions 27 x 18 mm, profile opening 15 mm
- Depth adjustment from the front
- Easy to install
- 2 die-cast zinc parts
- Mounting and connection plate
- Foldable connection for slopes, corners, offsets
- Incl. support for panelling
For installation depth 175-300 mm
Art. no. 116-000000360
- Suitable for wall projections or corner mounting
- Easy mounting in standard C-rails with dimensions 27 x 18 mm, profile opening 15 mm
- Depth adjustment from the front
- Easy to install
- 2 die-cast zinc parts
- Mounting and connection plate
- Foldable connection for slopes, corners, offsets
- Incl. support for panelling
Advantages of the new WERIfix multi wall brackets
The Multi wall bracket can be used flexibly thanks to the infinitely variable angle adjustment. Wall projections or corner installations mean no time-consuming extra work for the installer. The new Multi wall bracket makes it easy to hang the WERIfi x elements in standard C-rails measuring 27 x 18 mm and with a 15 mm profile opening
Optional accessories
Footrests, 1 set 800 mm
Art. no. 116-000000354
- For floor construction from 200 - 400 mm
- Extended version, length 800 mm
Special footrests, 1 set
Art. no. 116-000000352
- For the use of drywall elements
- On floors with underfloor heating
- Incl. fixing screws
Sound insulation set
Art. no. 116-000000347
- Structure-borne sound decoupling of the
- Wall and floor mounting
- With underlay and screw decoupling
- 4 sound insulation pads for mounting plates for structural decoupling
- 4 washers for screw decoupling
Traverses
Traverse for shortened ceramics
Art. no. 107-000000002
- Suitable for standard elements with WEK SLKplus and SLS
- Incl. fixing screws
Multi-beam for console load
Art. no. 107-000000006
- Mounting for wall plates/connection boxes, console loads, flush-mounted fittings, flush-mounted measuring devices, suspended storage tanks, instantaneous water heaters
- Depth adjustment 0-70 mm
- 4 x machine screw 8 x 20
- 4 x nuts
- 8 x washers
- With waterproof glued veneer wood panel
- Height:
- 210 mm
- Width:
- 575 mm
- Depth:
- min. 100 mm
Traverse for washing machine for drywall
Art. no. 107-000000021
- holder for wall discs/connection boxes
- Incl. washing machine UP siphon
- Depth adjustment 0-70 mm
- 4 x machine screw 8 x 20
- 4 x nuts
- 8 x washers
- With waterproof glued veneer wood panel
- Height:
- 210 mm
- Width:
- 575 mm
- Depth:
- min. 100 mm
Traverse for sink for dry walls
Art. no. 107-000000022
- Mounting plates for wall plates/junction boxes or flush-mounted installation bodies
- Incl. HT elbow DN 50
- 4 x machine screw 8 x 20
- 4 x nuts
- 8 x washers
- With waterproof glued veneer wood panel
- Height:
- 610 mm
- Width:
- 575 mm
- Depth:
- min. 100 mm
Traverse washbasin for dry walls
Art. no. 107-000000023
- Holder for wall discs/junction boxes
- 4 x machine screw 8 x 20
- 4 x nuts
- 8 x washers
- With waterproof glued veneer wood panel
- Extended drain bend DN 50/40; 80x180 mm
- Sound-insulated pipe clamp
- Rubber sleeve 32 mm
- Height:
- 360 mm
- Width:
- 575 mm
- Depth:
- min. 100 mm
Drywall traverse for washing machine
- Incl. flush-mounted washing machine siphon
- Mounting plates for wall plates/junction boxes
- Width:
- 500 mm
Drywall traverse for washing machine
Art. no. 103-000000033
- Mounting plates for wall panels/junction boxes
- Width:
- 500 mm
Drywall traverse for washbasin
Art. no. 107-000000008
- Extended drain bend DN 50/40; 80x180 mm
- Sound-insulated pipe clamp
- Rubber sleeve 32 mm
- Mounting plates for wall discs/connection boxes
- Width:
- 500 mm
